Red Bull

Rear wing. Performance - Local load. Re-profiled rear wing flap across𝄹 the span. Optimising the flap geometry in an interaction from the previous design to extract locally more load whilst maintaining adequate flow stability for all the conditions encountered.

Front corner. Reliability. a larger front brake cooling exit duct. The brake energy for the Montreal circuit is high enough to necessitate an enlarged exit duc🍷t from the fꦍront wheel bodywork, moving both inboard and upwards.

Mercedes

Front Suspension. Performance - Flow Conditioning. Realignment of track rod and lower wishbone forward leg. Realigning both the track rod and the lower wishbone forward leg to the local onset flow from the front wing reduces boundary layer losses and hence improves the f🍃low to the floor.

Front Corner. Circuit specific - Cooling Range. Increased inlet size. Increasing the brake duct inlet size, increases mas🐎s🌠 flow to the disc, which in turn increases heat rejection from the disc to the air.

Ferrari

No updates

McLaren

No updates

Aston Martin

Beam wing. Performance - local load. Twist distribution is revised with🍃 lower tips. The spanwise loading of the beam wing is modified from the revised twist distribution which increases the load generated, particularly near the tips.

Alpine

No updates

Williams

Front suspension. Performance - mec🐼hanical setup. A shorter steering arm is available for this event. This changes the ratio between steering w𒈔heel angle and road wheel angle and affects the drivers' ability to control the car.

Rear suspension. Performance - mechanical setup. A new rear pullrod is available. Geometrically it is unchanged other than it provides a larger range of ride height adjustment. The constrꩵuction is updated to provide a weight saving benefit. The new pullrod design simply brings the car closer to the legal weight limit. It also allows the ride height to be adjusted within a larger range without the need to physically swap the pullrod component.

RB

Rear wing. Performance - Local l📖oad. The camber & incidence of the upper wing profiles is an evolution of the previous designꦺ. The profile redesign provides more efficient downforce generation than the previous wing, whilst retaining the same range of drag suitable for high-speed circuits.

Front wing. Baꦏlance range. Shorter chord and reduced incidence compared to previous flap. This smaller front flap reduces the amount of overall load generated by the front wing assembly, in order♎ to balance the low drag rear wings expected to be used at this circuit.

Sauber

Rear wing. Circuit specific - drag range. Redesigned main plane and flap. The new profile of the 🌳rear wing, with a reduced flap and redesigned main plane, fine-tunes our aerodynamic profile for the low-drag requirements of the Canadian GP.

Beam wing. Circuit  specific - drag range. Redesigned beam wing profile. Together with the main rear wing update, this reprofiled beam wing improves the aerodynamic performance ꧙in the situations expected to be encountered in Montreal.

Haas

Front wing. Circuit specific - balance ra෴nge. Less cambered Front Wing Flap without IB hook. Less cambered Front Wing Flap without IB hook.